Stationary Welding Vapour Suction Chemical Dust 1.1kW
|Art. Nr.||CF Eco Jet Pulse|
|P-560H||CF-Eco HEPA – 1.1kW/1Phase/230V/50Hz|
|P-561H||CF-Eco HEPA – 1.1kW/3Phase/400V/50Hz|
|P-541||Polyester fine filter|
|AK-002||Active Carbon Filter|
Stationary Welding Vapour Suction Chemical Dust 1,1kW
The CF-Eco HEPA filter is designed for use in combination with the Flexi extraction arms. With a filter efficiency of up to 99.9%, the CF-Eco HEPA is suitable for the filtration of fine substances in the chemical and pharmaceutical industries. The clean air is recirculated into the room without heat loss.
Replaceable filter cartridge
Filtration takes place in two steps; pre-separation of coarse particles and filtration of fine particles with a replaceable filter cartridge. Replacement is easy and only takes a few minutes because of the front access panel. The remaining very fine dust is separated by a HEPA filter.
CF-Eco HEPA is equipped with a HEPA filter with a filtration degree of 99.995% for stainless steel welding/soldering.
A compact total solution
The CF-Eco for the chemical and pharmaceutical industry is made of powder coated sheet steel. The suction is at the top of the cabinet. The CF-Eco can be connected to a central extraction system.
The dimensions are 1305mm x 500 x 595 mm. (hxwxd).
The weight: 85 kg.
The air volume is 2000 m3/h
The noise level is 70 dB
Filter area is 14m2
Jet-Pulse filter cleaning
The Jet-Pulse filter cleaning ensures that the extraction remains optimal. The filter cleaning system cleans the cartridge in a few minutes. After cleaning, the tray in the unit can be emptied and the CF-Eco HEPA is ready to use again.